Description
Product Information
LAUNCH Creader Professional 719I Supports CAN FD and DOIP, Full OBD Functions, 24 Reset Services, LAUNCH AI, Lifetime Free Upgrade.
Brand: LAUNCH
Listed Package Contents
- 1pc x Main Unit
- 1pc x Main Diagnostic Cable
- 1pc x Type-C Charging Cable
- 1pc x User Manual
- 1pc x Quick Start Guide
- 1pc x Cloth Carrying Bag
- 1pc x GPSR Safety Warning Language
Requirements & Application Notes
- Throttle matching: This refers to using an automotive diagnostic scanner to perform initialization settings on the throttle actuator, so that the ECU's learned values return to the initial state. Only in this way can the action of the throttle (or idle speed motor) be controlled and adjusted more accurately to regulate the intake air volume.
- Maintenance light reset: When the vehicle maintenance light is on, it indicates that the vehicle is due for maintenance. After completing the maintenance, the mileage or driving time must be reset to zero, so that the maintenance light will turn off and the system will start a new maintenance cycle.
- Brake pad replacement: When the brake pads wear down to a certain thickness, they will rub against the brake pad sensor wire. At this point, the brake pad sensor wire will send a signal to the onboard computer, prompting brake pad replacement. After replacing the brake pads, a brake pad reset must be performed; otherwise, the vehicle will continue to give a warning.
- Urea reset: Urea reset (diesel engine exhaust aftertreatment): After the diesel exhaust fluid (automotive urea) is replaced or filled up, a urea reset operation is required.
- Automatic A/C initialization: When the vehicle air conditioning electronic control unit is replaced, the actuator is replaced, or the memory in the electronic control unit is lost, A/C initialization learning is required.
- Gear learning: Tooth signal learning must be performed after replacing the engine ECU, crankshaft position sensor, crankshaft flywheel, or after a fault code indicating that tooth signal learning has not been performed.
- ECU Reset: Write vehicle-specific configuration parameters to the control module to tell the ECU the vehicle's configuration, version, and compatible modules, enabling mutual recognition and normal communication across the vehicle's CAN network. The program firmware itself is not rewritten; only the configuration parameters are changed, which distinguishes this operation from flashing/programming (flash).
