Description
Product Information
LAUNCH X-431 PROG5 IMMO Programmer 3-in-1 IMMO Device for European Vehicles, Supports Key Matching, Key Programming, ECU/TCU Cloning & Writing.
Brand: LAUNCH
| Functions/Models | X-431 PROG5 | X-431 PROG3 |
| For VW/Audi Gen 3/4/5 key matching | Yes | Yes |
| For VW Gen 4 instrument all-keys-lost key reading | Yes | Yes |
| For Audi Gen 5 steering column chip R/W | Yes | Yes |
| MED17 engine OBD reading | Yes | Yes |
| For VW Gen 4 UDS engine replacement | Yes | Yes |
| For VW/Audi MQB engine/transmission/steering column replacement | Yes | Yes |
| For VW/Audi Gen 5 / MQB transmission FLASH/EEPROM R/W | Yes | Yes |
| For VW/Audi Bosch engine cloning | Yes | Yes |
| For VW/Audi Siemens engine cloning | Yes | Yes |
| Post-2014 UDS engine replacement (no original ECU needed) | Yes | Yes |
| For VW MQB 5C/5D key matching | Yes | No |
| For VW/Audi SIMOS18 series cloning | Yes | No |
| VW V850 instrument data reading & cloning | Yes | Limited support |
| VW RH850 instrument data reading & parsing | Yes | Limited support |
| For VW MQB instrument mechanical/smart key all-keys-lost (read/write/parse engine & trans data) | Yes | Limited support |
| For Benz key matching (FBS3) | Yes | Yes |
| For Benz engine/trans erasing (FBS3) | Yes | Yes |
| For Benz engine (FBS4) | Yes | Yes |
| For Benz trans cloning (FBS4): 2x 7-speed, FDCT, 9-speed | Yes | Yes |
| For Benz W164/W169/W209/W211 no-gateway all-keys-lost password calc (FBS3) | Yes | No |
| For Benz multi EIS cloning | Yes | Limited support |
| For Benz FDCT/VGS4 NAG2/VGS NAG3 cloning (FBS4) | Yes | No |
| For Benz DSM (FBS4) | Yes | No |
| For Benz key addition w/password calc (FBS3) | Yes | Yes |
| For Benz all-keys-lost password calc (FBS3) | Yes | Yes |
| For BMW CAS1/2/3/4, FEM/BDC | Yes | Yes |
| For BMW G-series key matching | Yes | Yes |
| For BMW engine ISN reading | Yes | Limited support |
| For BMW E-series 8HP trans erasing | Yes | Yes |
| For BMW E-series 8HP trans cloning | Yes | Yes |
| For BMW FRM repair | Yes | Yes |
| For BMW F-series 6HP trans erase/clone | Yes | Yes |
| For BMW F/G-series 8HP trans clone | Yes | Yes |
| For BMW F/G-series 8HP trans erase | Yes | Yes |
| For BMW engine replacement | Yes | Yes |
| For BMW Bosch engine clone | Yes | Yes |
| For BMW Siemens engine clone | Yes | Yes |
| For Porsche 2011-2017 key matching | Yes | Yes |
| For Porsche front/rear ECU clone | Yes | Yes |
| For Porsche engine & trans ECU clone | Yes | Yes |
| For Porsche battery repair | Yes | Yes |
| For Various Bosch engine clone | Yes | Yes |
| For Various Siemens engine clone | Yes | Yes |
| For Various trans clone | Yes | Yes |
| For Various DELCO/DENSO/Marelli engine clone | Wide support | Yes |
| For RH850 encrypted chip R/W | Wide support | Yes |
| For BMS chip R/W | Yes | No |
| For ID48/96 & ID46 chip cloning | Yes | No |
| For ECU checksum/verification | Wide support | Yes |
Listed Package Contents
- 1pc x main frame
- 1pc x test cable
- 1pc x XTA001
- 1pc x EEPROM
- 1pc x RH850/V850
- 1pc x USB Cable(type B)
- 2pcs x Black Clip Wire
- 1pc x switching power supply
- 1pc x European power cord
- 1pc x MB key
- 1pc x NS Cable V1
- 1pc x MCU Cable V1
- 1pc x Bench Cable V2
- 6pcs x Matching Adapter A V2.0
- 6pcs x Matching Adapter B V2.0
- 6pcs x Matching Adapter C V2.0
- 6pcs x Matching Adapter D V2.0
- 6pcs x Matching Adapter E V2.0
- 6pcs x Matching Adapter F V2.0
- 2pcs x Bench Extension Cables
- 1pc x Car Key
- 1pc x Key Chip Programming Cable
- 1pc x User Manual
- 1pc x Password Envelope
- 1pc x Packing List
Requirements & Application Notes
- Note: The product does not come with IMMO software and only supports basic IMMO functions for European vehicles. To work on other vehicle brands, please purchase an additional IMMO software license.
Product Images & Diagrams
